0.050 Inch Ball End Hex L-Key

0.050 Inch Ball End Hex L-KeyHigh Leverage We designed the keys to be longer in the largest sizes to increase leverage where it matters Tight Fit with Fasteners We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners 20 Degree Ball Angle Increases Access Our L keys implement a steep ball end angle that increases your ability to access fasteners while still maintaining sufficient strength Maximum Torque Strength

9 Hex Cap Screws Zinc Plated

Part Number: 100C1200WA2Z

Grade 8 Alloy Split Lock Washer Kit

Drill Bit Size: 25/64"

Size: 2-3/8"

Part Number: EZ-31515

Part Number: BIT-DMS73-4016

resulting in a higher performing tool than one-piece designs • Permanent Connection – The bit is pressed directly into the socket for a permanent connection that won't loosen over time or under stress • Two Size Markings – The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off • Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types • Socket Rail – The twist-to-lock clips on the rail hold sockets securely and can be repositioned anywhere along the rail

Part Number: 62C900HCS8Y

STI Tap: #3-48 STI

Part Number: Assortment Kit #399754 Pieces - Coarse Thread

The shape of the head is also optimized for access and strength while also preventing jaw spread