4" OD X 6" Long Matte Finish

4" OD X 6" Long Matte FinishThis 4" OD carbon fiber straight tube is used in air intake systems. Weighs 35 40% less than aluminum, yet is just as strong. Very attractive appearance. Our carbon fiber is 3K carbon fiber embedded in clear epoxy (wet process) and polished. Each of the bundles you see in the item consists of 3000 tiny fibers of pure carbon. The weave is twill, which means the bundles going one direction are spaced slightly wider than the bundles going the other

3" OD welded 304 stainless steel tubing with a mill finish and has

-18" leg lengths

This reducing insert adapts a 3" ID intake hose to a 2-1/4" OD tube

5 inch reducing silicone coupler is 3

This kit comes with everything to make up to 10 clamps of any size

This 90 degree silicone elbow is 5" ID on one end and 4" ID on the other and can be used any place you need a reducing 90-degree bend

This heavy-duty spring-loaded T-bolt clamp is used on 3-3/4" ID (5-ply) silicone hoses

-10 Angle Straight Hose Compatibility Braided Rubber Hose (NOT PTFE Lined) Fluid Compatibility Petrol

This 4-1/2" ID 90-degree intake elbow can be used any place you have two 4-1/2" OD tubes and you need to make a 90-degree bend

This reducing insert adapts a 5-1/2" ID intake hose to a 4" OD tube

The PTFE liner also prevents the fuel hose from hardening and will not allow the hose to fracture or crack

This 90 degree silicone elbow is 2-1/4" ID on one end and 2" ID on the other and can be used anyplace you need a reducing 90-degree bend