Mount only with Protective Shield

Mount only with Protective ShieldPart # INDS 1 Bearing Adjustment Dial Indicator Gauge for Measuring End Play on Heavy or Medium duty wheel ends. Note: Does NOT include a dial Indicator The aluminum bar is . 625 thick x 8. 25 long, and has multiple holes drilled for multiple applications as examples below and has a 14 20 thumb screw for easy adjustment. Tool includes extra strong 100Lb pull force magnets, spacers, and bolts. FF Steer Axle 4 12 bolt circle TN Tapered Trailer Axle 5 12

(R-Drv-Brk)

This is a 1/4" (

001") One Thousandths Dial Indicator

Without the shield it is very likely the dial indicator will be damaged if dropped

You will also need a (1) One extension tip for the dial indicator so the probe will reach the face of the spindle when using Aluminum hubs

0001") dial indicator which is more accurate and easier to read

Part # R-Drv-Brk

250) thick "R" Drive axle plate that can be used to check endplay on an aluminum hub

This is a 1" Drop Indicator Contact Point Extension with #4-48 Thread

0001") Ten Thousandths Dial Indicator

Part numbers = (FF-Brk)

This extension tip is needed to add length to the dial indicator to work on the aluminum hubs